86-15618190765
tommy.xu@hilmar.com.cn
Safety operation and regulation of CNC tool grinder
Release time: 2023-02-18
1、 Before starting the tool grinder, lubricate all parts of the machine tool, check whether the mechanical transmission is normal, whether the switch button is reliable, and ensure that the grinding wheel is intact and undamaged.
2、 Start the grinding wheel in inching mode to the normal processing speed and idle for five minutes.
3、 Pay attention when installing the grinding wheel;
1. Before installation, check whether the appearance of the grinding wheel is complete. When tapping the grinding wheel, you should hear a crisp sound to ensure that the grinding wheel is intact and undamaged.
2. Place a asbestos pad on the clamping wheel, balance it after clamping, and balance it again after installation and repair. The new grinding wheel needs to idle for five minutes.
4、 The grinding wheel shall not be operated at overspeed, and shall not exceed the warning speed.
5、 The grinding quantity shall be reasonably selected, and overload grinding is strictly prohibited.
6、 Before grinding, check whether the workpiece is firmly sucked or clamped. When clamping high workpieces and workpieces with small bottom area, use a stopper to lean against or special clamp to clamp to prevent failure.
7、 No one is allowed to stand directly in front of the grinding wheel rotation during startup to prevent the grinding wheel from breaking and flying out or the workpiece from flying.
8、 At the end of the work, the machine tool shall be wiped clean, the power supply shall be cut off, the parts shall be placed neatly, and the work site shall be kept clean.
Hilmar Machine Tool (Wuxi) Co., Ltd
Committed to the design and manufacture of CNC grinding machines, intelligent fixtures and automatic loading and unloading
The company team has more than ten years of experience in the design and manufacture of CNC grinding machines, intelligent fixtures, and automatic loading and unloading. It is an equipment manufacturing enterprise integrating automatic equipment research, CNC grinding machine R&D and manufacturing, and sales services.
希尔马机床
Contact Us
Mob: 86-15618190765 Mr.xu
86-13818690607 Mr.zhong
E-mail: tommy.xu@hilmar.com.cn
info@hilmar.com.cn
Add: No.7 Yuanjing Road, Yangshan Town, Huishan District, Wuxi City